Wd drive utilities update3/4/2023 ![]() ![]() Unfortunately, it does not have a test feature, so you’ll have to do that on your own (e.g., manually transfer large files to and from the drive) and then monitor its performance on the chart. WD makes it very easy to see and understand the chart: MB/s write and read speeds are shown with blue and green indicators, respectively, while the I/O write and read speeds are shown in purple and red indicators, respectively. The Performance section displays real-time performance metrics, including transfer speed MB/s and transfer IOPS via a chart. Lastly, the Interface Speed panel at the bottom right tells users the fastest supported speed of the drive and the current connection it is using. A green thermometer means normal operation while yellow indicates that the SSD is currently overheating. The temperature panel to the right reports the temperature of the drive every 30 seconds. In our case, our WD Blue drive is virtually empty.īelow the Capacity panel is the Life Remaining panel, which displays, in percentage, the remaining writes your WD drive can perform. Just to the right will list all volumes, color-coded with free vs. If the drive is full, the pie chart will simply turn red. The capacity panel shows the total size of the WD drive, along with the amount of free, used and unallocated space. attribute warnings, and will indicate if the SSD’s security protocol is activated or not (for supported drives).īelow, in the Status section, the SSD tool displays more detailed information about the drive. ![]() It will also alert users of any notifications, such as available software or firmware updates or any S.M.A.R.T. attributes) with two indicators: normal, which means the drive is in good condition or poor, which indicates that the number of spare blocks is at the minimum threshold or the drive is overheating. It also displays information about the drive health (based on S.M.A.R.T. General information about the selected drive is displayed at the top, including the model number and firmware version. If your drive(s) aren’t listed, simply click the “Refresh” icon in the upper right corner of the window to rescan the system for WD SSDs (though they should show up automatically). This drop-down list can be accessed from each section, which is very handy. If you have more than one WD SSD installed, you will be able to choose it from the drop-down list at the top right corner of the dashboard. Navigating through sections is easy, responsive and intuitive.Īfter you load up the tool, the Dashboard will automatically detect supported drives. It sports a nice blue background with an intelligent panel-layout design along the bottom. At first glance, we noticed that the interface has a much more modern look than most other SSD drive management tools we’ve looked at. Western Digital SSD Dashboard is used to manage the company’s drives (which includes SanDisk products), featuring useful disk information, ways to optimize and sanitize/clean your SSD, and easy point-and-click firmware updates.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |